From sheet metal component to finished assembly

Complete Sheet Metal Parts from Poland

A complete enclosure or sheet metal assembly requires more than just accurately cut and bent individual parts. The components must fit together perfectly after welding, finishing, and assembly. TOS manages the production of complete sheet metal assemblies in Poland—taking your drawings and bill of materials (BOM) all the way to a verified, finished product. You have a single Dutch point of contact to coordinate all processes, production partners, and delivery.

Completed sheet metal assemblies prepared for transport from Poland

A single workflow for your complete sheet metal product

A single technical handover

Drawings, the bill of materials (BOM), and final requirements form the foundation for all production processes.

Coordinated processes

Cutting, bending, welding, and finishing are managed as an integrated production workflow.

Assembly verification

We ensure not only the quality of individual parts but also the fit and dimensional accuracy of the final product.

Finishing tailored to end-use

Coatings, surface finishes for visible areas, and protection for connection points are specified in advance.

Delivery as agreed

Whether individual parts, assembly kits, or complete modules—the scope of delivery is clearly defined.

Bent metal profile and sheet metal component manufactured in Poland

Aligning processes with the final product

A dimension that is correct after cutting may not necessarily be the final, correct dimension after bending, welding, and coating. For this reason, we evaluate the entire production sequence. Which surfaces need to fit together? Which holes must remain free of coating? And should a critical mounting surface be machined before or after welding?

TOS coordinates these interface requirements in advance with our Polish production partner. You can find details on the individual techniques on our pages regarding laser cutting in Poland and sheet metal bending in Poland. When it comes to complete sheet metal components, the focus is on the overall combination and the final result after all processing steps are complete.

What does “complete” mean for your order? It could be a welded and powder-coated cover, or an enclosure complete with hinges, fasteners, and pre-installed components. We clearly define which parts TOS will supply, which components you will provide, and which assembly or inspection tasks are included in the scope of the order.

A comprehensive bill of materials (BOM) ensures that small parts aren’t discovered to be missing only upon arrival. Our agreements also cover item numbers, revision levels, quantities per assembly, and packaging requirements. This ensures you receive a product or set that integrates seamlessly into your own assembly process.

Also explore the options for assembly and transport from Poland.

Painted pump unit with assembled sheet metal frame

From bill of materials (BOM) to assembly-ready delivery

1. Product dossier

Drawings, bill of materials, revisions, and final requirements are assessed as a single dossier.

2. Production route

The sequence of cutting, bending, welding, and finishing is tailored to the specific assembly.

3. Initial assembly

Where necessary, a complete first-off product is evaluated for dimensions, fit, and execution.

4. Series production and final inspection

The series is produced according to the approved documentation and agreed-upon inspection points.

5. Packaging and delivery

Components and assembly kits are delivered with clear identification and appropriate protective packaging.

Enclosures, consoles, and assembled sheet metal parts

Machine covers and enclosures: bent panels, welded corners, doors, and mounting points are coordinated with one another. The agreed-upon visual quality standard applies to the finished product.

Consoles, bins, and assembly units: sheet metal parts can be combined with welded components, threaded elements, fasteners, and other parts. A set or complete module is supplied according to the specified bill of materials (BOM).

Steel, stainless steel, and aluminium each require specific processing methods. We define the material type, sheet thickness, and finish for every individual part. Welding, powder coating, or other surface treatments are selected based on the intended application, fit, and required level of protection.

When should you outsource complete sheet metal production?

Monitoring quality throughout the various production stages

In an assembly, minor deviations in individual parts can collectively lead to assembly issues. Therefore, we agree on which specifications will be checked during the process and which can only be assessed after final processing or assembly. Examples include connection dimensions following welding, ensuring threads remain clear after coating, and the fit of a door or removable panel.

For a new product, an initial complete assembly can be approved before full-scale production begins. We define the necessary quality control and documentation in advance. TOS coordinates the follow-up with the selected partner as part of our process for outsourcing production to Poland.

Hydraulic press brake bending sheet metal in Poland

Please provide an assembly drawing, drawings of the individual parts, and a complete bill of materials (BOM). For each item, specify the material, quantities, revision, finish, and any critical requirements. Indicate which purchased parts or components you will supply yourself, and specify the condition in which you wish to receive the final product.

The production partner evaluates how cutting, bending, welding, and finishing affect one another. We pay close attention to potential deformation, accessibility, tolerance chains, and the assembly sequence. Any design changes are discussed and incorporated into a new revision.

TOS selects a Polish partner based on the specific combination of processes required and the type of final product. In addition to machine capabilities, we consider the partner’s experience with assemblies, finishing quality, assembly processes, and quality control. If a specialist is required, their involvement is also integrated into the production workflow.

The quotation outlines the full scope of supply: sheet metal parts, welding, finishing, surface treatment, components, assembly, quality checks, and packaging. One-off costs and any exclusions are documented separately, ensuring complete clarity regarding the final product covered by the quoted price.

For new or complex assemblies, an initial complete product can be evaluated. We verify the agreed-upon interface dimensions, assembly fit, functionality, and finish. Approval applies specifically to the agreed-upon configuration; any subsequent changes will require a new assessment.

Individual parts and the final assembly must correspond to the same approved revision. TOS assesses how any changes might impact existing stock, ongoing production, or components that have already been purchased.

The agreed-upon drawings and bill of materials (BOM) remain the definitive reference for the production run.

In addition to the dimensions of individual components, checks can be performed on fits, assembly points, weld finishes, coatings, and the completeness of the bill of materials. Measurement reports, material certificates, or inspection photographs can be provided if agreed upon in advance. The inspection process is tailored to the intended use of the complete assembly.

The required surface treatment is determined based on the material, application, and visual quality standards. Threaded sections, mating surfaces, and electrical contact points may require specific alternative treatments or masking. We clearly define which components are to be assembled before coating and which are to be assembled afterward.

We agree on whether you will receive individual parts, organized assembly kits, or fully assembled products. The protection of visible surfaces, support for delicate components, and product identification are all tailored to this choice. Furthermore, the packaging is designed to suit the processes of unpacking, storage, and assembly at your facility.

Following the initial delivery, we discuss any findings from your receipt and assembly process. Once approved, the product specifications, inspection criteria, and packaging arrangements are applied to all subsequent orders. This ensures that the requirements for the complete assembly do not need to be redefined for every new order.

Examples of production via TOS

Aluminium Sign Clamp for Traffic Signs: Corrosion-Resistant and Ready to Install

For a client in the infrastructure sector, we developed a sustainable aluminium extrusion clamp used for the installation of traffic....

Sand Casting and Machining of Brake Drums

For one of our regular customers, we produced brake drums with an inner diameter of 500 mm, made entirely of....

Frequently asked questions about complete sheet metal assemblies from Poland

What is included in complete sheet metal assemblies?

These are sheet metal products that combine multiple processes—and potentially assembly. Examples include a welded and finished cover, an enclosure with a door, or a console with fasteners. The exact scope is defined in the technical drawings, the bill of materials (BOM), and the quotation.

This depends on the product and the chosen partner. Some steps can be performed at a single facility, while specific finishes or finishing may require a specialist. TOS coordinates the production route and handovers, ensuring you have a single point of contact for the agreed-upon delivery.

Yes—where appropriate for the product, surface treatment and assembly can be included in the order. Please specify the desired finish, visible surfaces, components, and assembly requirements. We will also define which areas or screw threads must remain free of treatment, and which components should be installed only after the surface treatment is complete.

Critical final dimensions, mounting points, finish specifications, and acceptance criteria are agreed upon in advance. In addition to in-process inspections, a fit check or an evaluation of the first completed unit may also be required.

Reports, certificates, and inspection photos are provided as part of the agreed-upon terms.

Please provide an assembly drawing, dimensioned drawings of individual parts, and a STEP or STP file, along with a bill of materials (BOM) specifying quantities and revisions. Include details regarding materials, sheet thickness, welding and finishing requirements, purchased components, assembly specifications, packaging, and delivery. You can submit these via our technical inquiry form.