CNC-turned parts to drawing · Manufacturing in China

CNC turning in China

TOS has CNC-turned parts manufactured in China for repeat series. Examples include bushes, shafts, rings, flanges and threaded nipples in steel, stainless steel, aluminium, brass or engineering plastics. The customer drawing defines the material, dimensions and inspection.

Within our Chinese manufacturing network, we select a partner by diameter range, machinery, experience and available capacity. You receive one all-in price for the agreed production, inspection, packaging and transport to your site, with one central point of contact. See also our overview of contract manufacturing in China.

Operator controleert gedraaide metalen ringen bij een CNC-machine in China

Outsource CNC turning through the right Chinese partner

Assess annual demand and call-offs together
Match the lathe to diameter and length
Compare setup, cycle time and material
Inspection points from the customer drawing
Delivered all-in to your schedule
CNC-draaien van een lange precisie-as met aangedreven gereedschap in China

What determines the cost of CNC-turned parts?

CNC-turning cost is more than machining time. Programming, tool preparation, setup and first-part inspection must be spread across the quantity. We therefore assess annual demand, production batch and parts per delivery together.

For one-offs and small quantities, conventional turning can be a suitable route, especially for relatively simple parts where CNC programming and setup weigh heavily on unit cost. TOS assesses whether conventional or CNC turning best matches the geometry, tolerances and quantities.

A larger batch can reduce setup cost per part but also creates more stock. TOS seeks a practical balance between unit price, call-off frequency and delivery reliability. Agreed quantities and transport costs are included directly in the all-in price.

If a turned part also requires flats, pockets or several holes, combined machining or an additional milling operation may be needed. See also CNC milling in China.

When does China offer an advantage? Particularly when the CNC cycle is combined with manual work such as loading, deburring, checking threads, cleaning, sorting or assembly. For highly automated turned parts, machine productivity, material use and tooling account for a larger share of cost.

Through our Chinese network, we can find a manufacturer suited to the material, diameter, length and required batch size. Not every turning supplier fits every part, so we verify machine capacity and measurement capability before quoting.

For small urgent orders or very frequent deliveries, CNC turning in Poland may fit better logistically. TOS compares total cost delivered to your site, not just an hourly or factory price.

Fijnmechanisch draaien van een klein messing onderdeel bij een productiepartner in China

From customer drawing to delivered turning series

Review drawing and quantities

You provide the customer drawing, material and required quantities. We discuss the dimensions, fits and delivery dates that matter.

Select a Chinese turning partner

TOS compares machine range, experience, measurement capability and available capacity in the Chinese network.

Build an all-in quotation

Production, agreed secondary processing, inspection, packaging and transport are offered as one scope.

Inspect first production

For a new or critical part, we agree which dimensions and features are assessed before the continuing series.

Produce and deliver the series

After release, we schedule production, protect vulnerable surfaces and deliver to the agreed plan.

Materials, tolerances and secondary processing

Material and starting form. CNC-turned parts can be made from bar, tube or a preformed blank. We process steel, stainless steel, aluminium, brass and engineering plastics, among other materials. The specified grade and delivery condition on the customer drawing remain authoritative; alternatives are never used without agreement.

Dimensions and functional features. For a bush, the bore may be decisive; for a shaft, the relationship between diameters; and for a nipple, the thread. Clearly state fits, roughness and runout or concentricity requirements when these matter to the application. We agree in advance which features are inspected and what reporting is needed.

Additional operations. Cross holes, slots, wrench flats or milled contours can be produced on a combined machine or in a secondary operation. Deburring, cleaning, grinding, heat treatment, surface treatment and assembly can follow. Read more about CNC parts with finishing and assembly in China.

When does CNC turning in China fit?

Ten agreements for a predictable turning series

The customer drawing guides production. For each order, we also verify material, quantities, required delivery condition and schedule. The Chinese manufacturing partner then knows what to supply, and you know what the all-in price includes.

Where needed, TOS coordinates quality control in China, additional assembly and transport from China.

CNC-draaibewerking van een metalen ring bij een productiepartner in China

State expected annual demand, quantity per order and required quantity per delivery. TOS uses this to assess production volume, machine capacity, stock and transport together.

The customer drawing forms the basis of production. Where possible, also provide a STEP file and identify dimensions, fits, threads and mounting faces critical to function.

Material grade and delivery condition follow the customer drawing. The Chinese partner assesses which bar, tube or preform fits technically and economically. Material changes are made only with your approval.

Diameter, length, rigidity and accessibility determine the suitable lathe and workholding. Cross holes, wrench flats or other milling operations may require live tooling or an additional machining step.

We compare preparation, material, cycle time, tooling, inspection, packaging and transport on the same basis. You compare the all-in price per delivered turned part, not just a machine or piece rate.

The customer drawing determines which features are inspected. We agree the measuring equipment, sample size and any reporting appropriate to the order. Tight tolerances are offered only when machine and measurement capability support them.

For a new or critical CNC-turned part, a first article or pilot batch can be assessed before the continuing series is made. We agree the features and scope of this assessment in advance.

We define whether parts must be deburred, cleaned, marked or further treated. Protection of threads, bores and vulnerable fitting surfaces is included in the required delivery condition.

Packaging prevents damage and mix-ups during transport. Part number, quantities and any batch identification match your receiving process. Agreed transport from China is included in the all-in price.

For each new order, we confirm the customer drawing, quantities, material and delivery date. Experience from the previous delivery can be included in the preparation of the next series.

Examples from the TOS network

Sand Casting and Machining of Brake Drums

For one of our regular customers, we produced brake drums with an inner diameter of 500 mm, made entirely of....

Steel Scrubbers and Frames for Fruit and Vegetable Storage: Strong, Leak-Proof, and Ready for Intensive Use

For a client in the fruit and vegetable storage industry, we manufacture a wide range of products, ranging from welded....

Frequently asked questions about CNC turning in China

From what quantity is CNC turning in China attractive?

There is no fixed minimum quantity for every CNC-turned part. Setup time, cycle time, material, secondary processing and transport together determine whether China is attractive. Share both annual demand and quantity per order.

No. For highly automated turning, machine productivity and material use can outweigh labour cost. Transport, stock and required response time also matter. TOS assesses whether China, Poland or another route best fits each enquiry.

There is no general tolerance for every turned part. Material, diameter, length, geometry, workholding and measurement method influence what is achievable. TOS has the critical dimensions from the drawing assessed by a suitable Chinese partner.

Yes, where technically and logistically sensible. A larger production batch can be called off in several deliveries. Stock location, ownership, call-off term, packaging and costs are then defined in the quotation.

Send the customer drawing and, where possible, a STEP file, together with material, quantities per order and expected annual demand. State the required delivery condition, critical dimensions, any reporting and your delivery location. Submit this through our technical enquiry.