Strong preform, accurate final dimensions · Production in China

CNC machining of forgings in China

A forging provides strength and a material-saving preform; CNC machining of forgings in China then ensures functional accuracy. Consider bearing seats, bores, threads, fitting surfaces and mounting contours.

TOS coordinates forging allowance, references, clamping, heat treatment and measuring method as one production route. This way we prevent the raw forging part and the machining from being optimized separately.

Gloeiend stalen smeedstuk vóór CNC-nabewerking in China

Stable datums make a rough forging accurately machinable

Functional datums

We define the planes and centre lines from which machined features are dimensioned on the customer drawing.

Targeted machining allowance

Sufficient—but not excessive—material is added only where machining is required.

Clamping rough forgings

Shape variation and scale require clamping points that secure the part without distorting dimensions.

Hardness and tool selection

Material, heat treatment and interrupted cuts affect cutting conditions, tool wear and machining time.

Inspection after the complete route

Fits, positions and relationships are inspected after all dimension-defining operations are complete.

CNC-nabewerkte metalen smeedstukken tijdens maatcontrole op een meetrooster in China

Machining forgings requires different clamping from bar stock

A rough forging has natural shape variation. As a result, it cannot always be clamped against an arbitrary outer surface. We are looking for fixed references that can position the part repeatedly and assess whether an initial plane or drilling is necessary to build up the following operations.

The sequence of free-form forging-in-china/”>free-form forging, heat treatment, straightening and machining also counts. Hardness or change in shape after heat treatment can be a reason to pre-process and only then make the final dimensions.

For recurring series, one Chinese production route can combine the forging and CNC machining. Sometimes the forging supplier itself has suitable machines; sometimes TOS connects a specialized machining partner. In both cases, one technical coordination remains leading.

We assess not only the CNC hourly rate, but also material surcharge, number of fixtures, tool wear, measuring time, failure risk and protection of machined surfaces during transport.

Serie CNC-nabewerkte metalen klemhuizen met interne schroefdraad uit China

From rough forged form to ready-to-assemble part

1. Compare final drawing and forging shape

We record which features remain forged and which surfaces, bores or contours are machined.

2. Coordinate dates and fees

References and local machining allowances are linked to the expected variation of the rough part.

3. Select machine and fixture

Part size, hardness, accessibility and required measuring equipment determine the suitable CNC partner.

4. Check the first article completely

The first machined forging is measured for functional dimensions and relationships before the series is released.

5. Clean, protect and deliver

Chips and coolant are removed; sensitive fits are protected for packaging and transport.

Machining where the function requires it

A forging does not need to be made completely smooth or dimensionally stable. By machining only bearing seats, sealing surfaces, threads and mounting points, the strong and material-efficient preform is retained. This can be much more efficient than milling the complete part from solid block material.

For machining, TOS uses partners from the network for CNC turning and CNC milling, tailored to dimensions, material and batch size.

When is CNC machining of forgings appropriate in China?

For example, we organize CNC machining of forgings

We compare the final drawing with the rough forging form and record which features are machined. We then coordinate the forging partner, CNC capacity, heat treatment, measurement plan and delivery.

CNC-nabewerkt gesmeed stalen trekoog met verspaande schacht en schroefdraad uit China

We determine which contours are created in the mold and which surfaces, holes and fits are machined after forging.

The customer drawing remains the governing document. We mark references, position requirements and interrelationships that determine clamping and measurement.

It is reviewed for each processed surface whether enough material is available to completely cleanly machine oxide skin and shape variation.

We determine whether roughing, heat treatment and finishing are necessary to keep hardness and dimensional change manageable.

Machine range, clamping, tools, material hardness and measuring options are inspected by the partner.

The first part practically confirms references, accessibility, cutting conditions and tool selection.

Functional dimensions are inspected by appointment. Measurement reporting is provided when this has been agreed in advance.

During the series, clamping, tool wear and critical dimensions are monitored according to the control plan.

After CNC, parts are cleaned and where necessary preserved, coated, marked or mounted as part of an assembly.

Fitments, threads and sealing surfaces are protected for transport. Packaging and delivery are included in the all-in route.

Examples of forged and CNC finished parts

Authentic Track Links for Historic Vehicles

For a client focused on the restoration of historic military vehicles, we manufacture precision track links. These components are produced....

Brass Cast Parts for Heating Technology

For a client in the heating technology industry, we produce high-quality brass castings for use in technical installations. These components....

Frequently asked questions about CNC machining of forgings

What features are usually machined after forging?

Common features include bearing seats, bores, threads, sealing surfaces, fitting dimensions and mounting contours. The rough forging skin can remain in non-functional areas.

That depends on hardness, size change and final tolerance. Sometimes it is first pre-processed, then heat treated and then finished to final size.

The surcharge depends on part size, forging process, local shape variation, oxide layer and clamping. TOS determines this together with the forging and CNC partner per surface.

We choose repeatable dates or create a specific clamping jig. Sometimes a reference surface or bore is first made for the following processing steps.

Send the final drawing, rough forging drawing or STEP files, material, quantities, heat treatment and desired inspection. If data is missing, TOS can record or scan the existing part.