Sheet metal parts, tubes, and profiles in Poland

Laser cutting in Poland

Have your sheet metal parts, tubes, and profiles laser-cut in Poland. TOS selects the ideal production partner and coordinates the material, cutting process, quality control, and delivery. Additional services—such as bending, welding, and finishing—can also be integrated into the same production workflow, while you maintain a single point of contact in the Netherlands.

High-precision metal sheet laser cutting at TOS

Why choose laser cutting in Poland via TOS?

The right cutting partner

TOS aligns material, geometry, batch size, and subsequent processing steps with the manufacturer’s capabilities.

Sheet, tube, and profile

Flat sheet components as well as tube or profile parts each require specific laser equipment and dedicated work preparation.

Cutting and further processing

Combine laser cutting with services such as deburring, bending, welding, and surface treatment, as needed.

Focus on dimensions and cut edges

We establish clear agreements regarding dimensions, holes, cut edges, and quality inspections tailored to your intended application.

End-to-end oversight, right up to delivery

A single Dutch point of contact for technical coordination, project progress, packaging, and transport.

Precision components via tube laser cutting at TOS

From laser cutting to a complete sheet metal component

Laser cutting is often the first step in the production of a sheet metal component. Using a digital cutting file, we create contours, cutouts, and holes. For tubes and profiles, we also ensure that the cross-section, wall thickness, and connection points are perfectly suited to the final part.

At TOS, we look beyond the cutting process itself. Does the part require bending, welding, or coating? We incorporate these subsequent steps into our work preparation. This ensures that the cutting geometry, material selection, and quality specifications are all perfectly aligned with the final product.

Read more about our cutting services and production in Poland.

For the next step after cutting, you can have sheet metal bent in Poland. If you are looking for a finished enclosure or an assembly requiring multiple processes, take a look at our complete sheet metal components from Poland.

A precise quote starts with your drawing and cutting file. Ideally, please provide a DXF or DWG file, a PDF containing dimensions and specifications, and—where relevant—a STEP model. Please specify the material type, sheet or wall thickness, quantities, revision, and desired delivery date.

Also, indicate which cut edges will remain visible, where fit or dimensions are critical, and which subsequent processing steps are required. We will confirm the achievable cutting range, precision, and capacity for each individual request.

Precision-cut metal plate with drilled holes, manufactured by TOS

From initial inquiry to fully delivered component

Technical requirements and specifications

Please submit your drawing, 3D file, material details, quantities, and quality requirements. We assess manufacturability and missing data.

Production route and partner selection

TOS evaluates the most suitable laser-cutting processes, material formats, secondary operations, and available capacity.

Quotation and quality agreements

You will receive a clear quotation covering processing, inspections, finishing, packaging, and delivery.

First-article inspection and approval

For new or critical parts, we define which dimensions, cut edges, and connection points must be verified before full-scale production begins.

Series production and delivery

Once approved, the production process commences, followed by agreed-upon quality checks, packaging, and transport from Poland.

Materials and applications for laser cutting

For laser-cutting projects, we work with materials such as steel, stainless steel, and aluminium. The specific material types, thicknesses, and dimensions that can be processed depend on the available equipment and the requirements for the part. We confirm these capabilities before an order is finalized.

Examples include mounting plates, brackets, panels, guards, enclosure components, and parts for welded frames. Following the cutting process, the production workflow can include deburring, bending, welding, powder coating, and assembly.

When is laser cutting in Poland a good option?

How TOS manages your laser-cutting projects in Poland

TOS begins by reviewing your drawings, intended application, and required quantities. We identify which dimensions and cut edges are critical, and ensure the cut parts are perfectly suited for any subsequent bending, welding, or assembly processes.

We coordinate all technical inquiries, revisions, and handovers. Through agreed-upon quality control and an appropriate supply chain, we maintain oversight of production, packaging, and delivery.

Black powder-coated bent sheet metal component produced in Poland

Please provide a dimensioned PDF drawing and, ideally, a DXF or DWG cutting file. For tubes, profiles, or assemblies, a STEP model is also helpful. Please specify the material, thickness, quantities, revision, critical dimensions, and any required secondary operations.

We evaluate contours, holes, material selection, and how the parts interface with subsequent processes such as bending, welding, or assembly. We also determine which cut edges require finishing. The specific capabilities and limitations for each drawing will be confirmed.

We select a production partner based on the specific requirements—whether for sheet metal or tube/profile processing—considering material type, dimensions, wall thickness, and batch size. TOS ensures that the partner’s cutting range and available capacity are confirmed for your project.

The quotation details the material, laser cutting, any secondary operations, quantities, setup costs, quality inspection, packaging, and delivery. The drawings and their respective revisions serve as the basis for all agreements.

For new or critical components, we can arrange for a first-article sample or a pre-production run. We verify key dimensions, hole positions, potential deformation, burrs, and the condition of visible surfaces before authorizing full-scale production.

Once approved, production proceeds according to the agreed-upon drawings and cutting files. We coordinate any technical queries or design changes, ensuring that new revisions are clearly documented and incorporated into both the production and inspection processes.

The inspection plan is tailored to the specific application. This includes checks for external dimensions, hole positioning, deformation, burrs, and the quality of visible surfaces.

Measurement reports, material certificates, or additional inspections can be arranged in advance where necessary.

Following the cutting process, parts can be deburred, bent, welded, or finished with an appropriate surface treatment. We coordinate the sequence and handover to ensure the cut parts integrate seamlessly into the final product.

Components can be cleaned, marked, fitted with purchased parts, and assembled. They are then securely packaged to protect against impacts, scratches, corrosion, and mix-ups. TOS tailors the packaging and transport from Poland based on weight, surface finish, and intended application.

After the initial delivery, we evaluate dimensions, surface treatments, rejection rates, assembly, packaging, and lead times. For subsequent orders, drawings, control plans, and logistics instructions are refined as needed to ensure a stable production chain.

Examples of production via TOS

Steel Scrubbers and Frames for Fruit and Vegetable Storage: Strong, Leak-Proof, and Ready for Intensive Use

For a client in the fruit and vegetable storage industry, we manufacture a wide range of products, ranging from welded....

Sand Casting and Machining of Iron Wheels

For a client in the heavy transport sector, we produced an iron wheel for high-load trailers, sand-cast in GG25 gray....

Frequently asked questions about laser cutting in Poland

Which materials and thicknesses can be laser-cut?

We evaluate materials including steel, stainless steel, and aluminium. The achievable scope depends on the material, plate or wall thickness, dimensions, and the specific production setup chosen. TOS confirms the possibilities for each individual request; there is no universal cutting range that applies to all partners.

Yes, tube and profile components can be included in your request. We assess the cross-section, wall thickness, length, cutouts, and connections, and then select a partner with the appropriate equipment.

Yes. Deburring, bending, welding, surface treatment, and assembly can all be part of the same production workflow. We coordinate the cutting geometry and handover in advance to ensure the final product meets your requirements.

The achievable precision depends on the material, thickness, geometry, and process. Please indicate critical dimensions and the required edge quality on your drawing. We will determine whether deburring or additional processing is necessary and agree upon the specific quality checks to be performed.

Please submit a PDF drawing—ideally accompanied by a DXF or DWG file, and optionally a STEP model. Include details such as material, thickness, quantities (per order and per year), revision, tolerances, any subsequent processing steps, and your delivery requirements. You can submit your request via our contact page.