To select a metal foundry, look beyond the quoted piece price. The right supplier must match the alloy, casting process, geometry, volume and quality risk of the part. A foundry that performs well on large sand castings may not be the best choice for thin-wall die castings or investment cast components. A structured evaluation makes technical and commercial trade-offs visible before tooling commits you to one source.
1. Casting process and part fit
Confirm that the proposed process suits size, wall thickness, complexity, surface finish, tolerance and annual volume. Ask the foundry to explain why its process is appropriate and which features create risk. Review alternative routes before requesting quotations, especially when fabrication or machining could compete with casting. Our guide to outsourcing metalworking provides a wider process-selection perspective.
2. Material capability
Check experience with the exact alloy family and required properties. Review melting equipment, chemistry analysis, heat treatment and control of returned material. For regulated or critical products, confirm applicable standards and material traceability. Similar-looking castings made from a different alloy are not sufficient evidence of capability.
3. Engineering support
A capable foundry should review draft, wall transitions, fillets, parting line, core strategy, feeding, gating and machining allowances. It should identify likely shrinkage, porosity or distortion risks before tooling. Ask what simulation, pattern design and sampling resources are available. Early engineering input can reduce both tooling changes and recurring scrap. See also our guidance on improving part manufacturability.
4. Quality system and inspection
Review quality-system scope, calibration, nonconformance control and corrective action. Then examine part-specific inspection capability: dimensional measurement, chemical analysis, mechanical testing, pressure testing and suitable non-destructive methods. The supplier should translate drawing requirements into a control plan. Use our supplier audit guide to verify evidence on the shop floor.
5. Tooling ownership and maintenance
Clarify who designs, approves, owns, stores and maintains patterns, dies, core boxes and gauges. Define expected tool life, replacement responsibility and access to tool drawings. Confirm what happens if production transfers. Tooling terms should be documented before payment, not debated after a delivery problem.
6. Capacity and delivery reliability
Evaluate furnace, moulding, core making, finishing, heat treatment and inspection as one system. The bottleneck may sit outside pouring. Ask for current loading, shift pattern, maintenance approach and contingency plans. Check whether subcontracted operations create hidden lead time or dependency. A realistic capacity review is especially important when volumes will ramp rapidly.
7. Total landed cost
Compare tooling, samples, castings, secondary operations, inspection, packaging, freight, duties and inventory. Include yield and the commercial treatment of scrap or rework. A low casting price can be offset by machining problems, quality escapes or long replenishment cycles. The cost framework in manufactured part cost drivers helps normalise quotations.
8. Communication and supplier governance
Assess response quality during the enquiry. Does the foundry ask relevant technical questions, document assumptions and identify risks? Agree revision control, change approval, performance reporting and escalation routes. For remote suppliers, determine who verifies process changes and corrective actions locally. Our article on manufacturing supplier risk management explains how to plan continuity controls.
Use a weighted selection matrix
Assign weights according to part risk: process fit and quality may dominate a safety-critical casting, while capacity and cost may carry more weight for a mature standard part. Score only evidence that has been verified. Finish with a representative trial order and first-article approval before series release.
TOS can shortlist, audit and manage metal foundries while coordinating tooling, inspection, machining and international delivery. This keeps engineering, commercial and quality decisions within one controlled sourcing programme.
Check the complete supply route
Many foundries subcontract heat treatment, machining, coating or specialist testing. Identify these sub-suppliers and confirm how the foundry controls them. Responsibility for a finished casting should remain clear even when several companies contribute. Include subcontractor changes in the approval procedure and verify that certificates remain linked to the correct batch.